Time Delay Relay Module 6-30V with Digital LCD Display and Micro Usb Port
1) LCD display.
2) Support high and low-level triggers.
3) Emergency stop function.
4) Sleep mode, Wake up with any button.
5) Automatically save parameters.
6) Support UART Set.
Share this product:
IT is a multi-function delay relay module. LCD display, very clear, easy to use, powerful. It can be widely used in smart home, industrial control, automatic irrigation, indoor ventilation. protect.
Support high and low level trigger;
Emergency stop function;
Sleep mode, wake up with any button;
Automatically save the parameters;
Support uart set;
Independent of parameters;
Continuously adjustable from 0.01 seconds to 9999 minutes;
optocoupler isolation. enhanced anti-interference function
Product name: delay relay module
Product number: XY-LJ02
Operating voltage: DC 6V-30V or 5V micro USB
Control current: 10A (max)
Quiet Current: 15mA
Working current: 50mA
Working temperature: -40 ~ 85 ℃
Suitable for battery: storage battery, lithium battery
Trigger signal source: high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switching control (manual switch)
Reverse protection: yes
Physical dimension: 80*38*2.1mm
P1: After the relay gets the trigger signal, it keeps for time op and then releases the relay; The input signal is aggressed if the trigger signal is regained during delay time op.
P2: After the relay gets the trigger signal, it continues for time op and then the relay; If the module gets the trigger signal again during the delay time op, the delay delay starts again.
P3: The relay keeps for time open after get the trigger signal, and then the relay turns off; If the module gets the trigger signal again during the delay time op, it will reset and stop timing again.
P4: After the relay gets the trigger signal, it keeps for time cl, and then the relay keeps for time ope, and the relay is released.
P5: After the relay gets the trigger signal, it keeps for time op, and then keeps for time CL, the next relay, and then loops the above action. The module will reset and stop timing and relays if it gets a trigger signal during the loop again. The number of cycles (lop) can be set.
P6: The relay does not get the trigger signal, power on, keep for time ope, keep the relay time CL and repeat the above action. The number of cycles (lop) can be set.
P7: Signal hold function. Reset delay time if the relay keep keeps getting triggered. When relay, the signal disappears. Re-timing during the trigger signal when the reset delay time.
1 X Time Delay Relay Module 6-30V with Digital LCD Display and Micro USB Port.