₹ 7,078.82 7078.82 INR ₹ 7,078.82

₹ 5,999.00

    This combination does not exist.

    Add to Cart Buy Now

    100% Original
    Free Delivery*
    Easy Return

    Share this product:



    FS-Th9X has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions.
    AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.

    2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. 


    • Brand Name: FlySky

    • Item Name: FS-TH9X 2.4G 9CH Transmitter

    • Channels: 9 Channels

    • Model Type: quadcopter,glider, helicopter, airplane, also car or boat

    • RF Range: 2.40-2.48GHz

    • Bandwidth: 500Hz

    • Band: 160

    • RF Power: less than 20DB

    • 2.4G System: AFHDS

    • Modulation: GFSK

    • Code Type: PPM/PCM

    • Senditivity: 1024

    • LCD Type: 128 x 64 dot

    • LCD Backlight: No

    • Low Voltage Warning: yes(less than 9V)

    • DSC Port: yes(3.5mm:output:PPM)

    • Charger Port: yes

    • Size: 180 x 220 x 70 mm

    • Power: 12VDC or 8 x 1.5AA

    • Weight: 670g

    • Mode: Mode 2

    • Control Range: 350-400m

    • Model Memory: 8​

    The transmitter functions:

    • Throttle curves 

    • Pitch curves
    • Endpoint adjustments
    • Subtrim

    • Swash AFR mixesServo reversing

    • Timer

    • Dual rate

    • Exponential

    • Flaperons

    • V-Tail mixing

    • Elevons

    Flysky FS-R9B 2.4G Receiver:
    • Product Number: FS-R9B

    • Channels: 8 Channels

    • Receiving Sensitivity: -105dBmFrequency Range: 2.4-2.48GHz

    • Frequency Width: 500KHz

    • Wave Band: 160

    • Modulation: GFSK2.4G Mode: Automatic FM digital system

    • Channel Resolution: 1024 classesPower: 4.0-6.55V DC

    •  Weight: 18gAntenna Length: 26mm 

    •  Size: 52*35*15mmColor: Grey 

    •  Certificate: CE,FCC 

    How to bind the RX (receiver) to the TX (transmitter):
    1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
    2. Hold down bind button on transmitter module while turning on the TX
    3. The light should go steady now
    4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
    5. Turn on TX and then turn on plane/heli

    If you need to connect the transmitter to a Lipo battery,please pay attention to the positive and negative of the interface,and connect the battery to the two pins on the left.

    Package Included:
    1 x FlySky FS-TH9X 2.4G 9CH Transmitter
    1 x FS-R9B 8CH 2.4GHz Receiver
    1 x RM002 2.4GHz Module

    ​1 x Bind Plug

    Recently viewed Products