PRODUCT DESCRIPTION / SPECIFICATIONS
This is a DIY high votlage pulse gennerator module, based on the tesla coil principle, output high voltage pulse current, thus it will generate the elecric arc between the two wires. It has compact size and simple circuit design but high efficiency. Just provide 3.7-7.4V power supply, it can output about 1000KV high voltage perfect for electricity science experiment，negative ion generator，DIY science products, etc.
- Input: 3.7V - 7.4V / 4A
- Output Voltage: 800KV - 1000KV/0.5A
- Dimension: 88.5 x 26mm (LxD)
- Input Current: 4A
- Output Current: 0.5A
- Discharge Time: 10s
- Arc distance/High voltage discharge distance range: 15mm - 20mm
- Power supply: 1x 3.7V Lithium Battery, 2x 3.7V Lithium Batteries in series(such as 18650 Battery), NiCd/NiMH Batteries, 4V/6V Lead-acid Batteries, etc. (6V battery is Recommended for the best effect)
- Based on the tesla coil principle, output high voltage pulse current with simple circuit design, easy to use
- Avoid power on when No load.You must adjust the appropriate distance for high-voltage terminal before power on.The longer Arcing distance,the higher input voltage and battery capacity.
- It is prohibited exceed the maximum arcing distance.Otherwise,Energy can not be released due to high pressure, easily damaged modules.
- Can not work long time. 4.The module may have the leftover electricity, please put the cable ends to the metal items to release the electricity.
- Please be careful when using it due to the high voltage.
- The module may have the leftover electricity, please put the cable ends to the metal items to release the electricity.
- The same color cable end is output port, the different color end is input port(red cable is positive and green cable is negative)
- The method of measurig the approprate input voltage:When there is electric arc appear, the so far voltage is the appropriate voltage.