• Free Delivery
  •  Mon-Fri: 9.30 am - 6.30 pm
  •  Awesome Support                                                                 

Arduino Pro Micro 5V Development Board

SKU: 7922

1) ATMEGA32U4 running in 5V / 16MHz
2) Support Arduino IDE V1.0.1
3) Micro USB interface programming on the board
4) Four 10-bit ADC pin
5) 12 digital I / O (5 PWM capability)
6) Rx and Tx hardware serial connection

    ₹ 470.82 470.82 INR ₹ 470.82 (Incl. GST)

    ₹ 399.00

    This combination does not exist.

    Add to Cart Buy Now

    100% Original
    Free Delivery*
    Easy Return

    Share this product:


    This Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC. The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.


    • ATMEGA32U4 running in 5V / 16MHz

    • Support Arduino IDE V1.0.1

    • Micro USB interface programming on the board

    • Four 10-bit ADC pin

    • 12 digital I / O (5 PWM capability)

    • Rx and Tx hardware serial connection


    • Microcontroller ATmega32U4

    • Input Voltage(Recommended) - 7-12V

    • Operating Voltage (VDC)- 5

    • Input Voltage (limits)- 6-20V

    • Analog I/O Pins- 12

    • Digital I/O Pins- 20

    • DC Current per I/O Pin (mA)-20

    • DC Current for 3.3V Pin (mA)- 50

    • PWM Pins- 7

    • Flash Memory- 32 KB

    • EEPROM 2.5KB

    • SRAM- 1

    • Clock Speed- 16 MHz

    Package Include:

    • 1 x Arduino Pro Micro 5V Development Board

    Similar Products
    Accessory Products
    Recently viewed Products