Musical Keyboard DIY Kit
Share this product:
PRODUCT DESCRIPTION / SPECIFICATIONS
This Musical keyboard generates 15 different musical notes.It has a PCB with 15 parallel copper strips. Each strip corresponds to one note.The circuit is build around IC1, which is used as a stable multi-vibrator.The frequency produced depends on the note selected by the probe. When we put the probe on different strips, we are effectively changing the frequency by changing the resistance between pin7 and pin2 of IC1.
Working/About the Circuit:
IC1 as shown in the circuit diagram is wired as an astable multivibrator.The input pin2 of IC1 is below 1/3Vcc, output at pin3 changes its state from low to high.This is achieved by putting the probe on strip, which changes the voltage level of pin2 below 1/3Vcc and IC is triggered.At a particular instance, the combination of R1 and R2 to R16 charges capacitor C3, and voltage across the capacitor keeps on increasing. When it becomes 6V, the threshold voltage at pin6 makes output at pin3 low.
Now C3 starts discharging through R2 to R16. As soon as voltage of C3 goes below 1/3Vcc, pin2 sense this voltage and switches output at pin3 from low to high. In this way, we get the square output at pin3 since C3 charges and discharges through R2 to R16. The charge and discharge times can be varied by changing values of combination of resistors from R2 to R16 through probe, which in turn change the charging and discharging periods of C3.
For a sweet melody sound, it is required to have a symmetrical square wave. Thus, R1 should be kept small as compared to R2 to R16. For making the keyboard, PCB with copper parallel strips on it is readily available.The circuit uses 9V DC supply, so a battery of 9V should be used for satisfactory operation.
- music instruments
Note: This kit comes unassembled, User can assemble easily with the included user guide.