LCD 16x2 Blue Display Generic

    116.82 ₹ 116.82 ₹ 116.82000000000001 INR

    99.00 ₹

    Option not available

    This combination does not exist.

    Add to Cart

    SKU:SYN-7113


    Got Better Price
    Product Customization Request
    Request Call back / Product Support
    Return & Shipping Policy

    PRODUCT DESCRIPTION / SPECIFICATIONS


    PRODUCT DESCRIPTION:

    If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 Parallel LCD Display with IIC/I2C interface is a quite good solution.

    This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. 

    The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.

    This is great blue backlight LCD display. It is fantastic for Arduino based project. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.

    This display overcomes the drawback of 

    LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which shows a good library and little of coding.

    The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

    If you already have the I2Cadapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. 

    The LCD display works with 5 Volts. So we go for the 5V Pin.The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

    SPECIFICATION:​

    • 16 Characters x 2 Lines
    • 5x7 Dot Matrix Character + Cursor
    • 4-bit or 8-bit MPU Interface
    • Works with almost any Microcontroller
    • Blue LCD Display