L298P based Shield for Arduino motor control applications.
Onboard Buzzer (D4) for alert tones.
Bluetooth Interface with direct plug-in option, reducing wiring hassles.
Six Analog Interfaces for versatile connections.
Forward/Backward Steering Indicators for precise motor direction control.
L298P Chip for robust motor drive performance.
Servo Header connected to pin D9 for easy expansion.
Comprehensive Motor Control with digital I/O capabilities.
Simplified Integration with Arduino for hassle-free setup.

Module Supply Voltage: 2V-10V
Signal Input Voltage: 1.8V-7V
Single Operating Current: 1.5A
Peak Current: Up to 2.5A
Thermal Protection: With Auto Restore
Low Standby Current: Less Than 0.1uA
Mounting Hole Diameter: 2 mm
Ultra-small Size: Easy Integration

Voltage: AC 220V adjustable to 10-220V
Power: 10,000W maximum, 5,000W continuous
Design: Double circuit board for stability
Condenser: Integrated high-voltage unit
Diode: ST trigger for improved control
Cooling: Recommended self-imposed fan

High Electricity Production Thanks to efficient design.
No Special Equipment Required Easy setup under sunlight.
Polycrystalline Panel For durable and high-quality performance.
Moisture and Pollutant Resistant Enhanced longevity in harsh conditions.
Portable Size Convenient for small spaces and DIY projects.

Output Channel: Single channel output
Power Supply: Operates on 3.3/5V
Sensitivity Control: Built-in potentiometer
Signal Output: Indicator lights for output
Flame Spectrum Sensitivity: Highly sensitive to flames
Detection Angle: Covers 60 degrees
Arduino Compatible: Connect to microcontroller IO
Response to Light: Detects regular light sources

Operating Voltage: 3.3V-5V
LM393 Comparator: Wide range voltage comparator
Adjustable Sensitivity: Fine-tune for precision
Signal Output Indicator: Easy installation
Digital Output: Outputs low-level signal
Magnetic Field Detection: Reliable sensing

Product: Sound Detection Sensor Module
Operating voltage: 3.3V-5V
Signal output: Single channel
Light weight: Easy integration
Sensitivity adjustment: Onboard potentiometer
LED indicator: For sound detection

High Efficiency: Operates at up to 86% efficiency for energy savings.
Durable Casing: Aluminum and stainless steel casing for longevity.
Advanced Protection: Features over-voltage, over-current, overheating, and short-circuit safeguards.
Adjustable Output: Voltage adjustment knob increases output by 10-15%.
Low Ripple: Provides high stability for sensitive electronics.
Wide Input Range: Compatible with 100-240VAC, 50/60Hz power sources.
Compact Design: Lightweight and compact for versatile installation.
High PF: Power factor >0.9 ensures optimal performance.
Versatile Applications: Ideal for lighting, security systems, robotics, and more.

High Quality Made of high-grade alloy steel.
Durable Edges Heat-treated 60 HRC cutting edges.
Comfortable Grip Cushioned ABS plastic handles.
Versatile Use Perfect for copper and aluminum conductors.
Size & Weight Length 12cm, width 6cm, weight 50g.

High Efficiency: High conversion speed.
Durability: Weather-resistant poly frame.
Compact Size: Measures just 80mm Dia..
Easy Installation: No frame needed, solder connections.
Low Light Performance: Works fine under low light.

Directly Plug Antenna Interface
I2C Bus Communication
Multi-capacitor Combined Filter
Blue LED Power Indicator
High Sensitivity Low Noise RF Input Amplifier
High Power AGC Auto Gains Control Circuit
Download Datasheet

Material: Flame Retardant ABS/PC Plastic
Bore Diameter: 32.35MM
Design: Combines Into Various Sizes
Application: Ideal for Complex Battery Packs
Safety: Vibration Test Approved
Compatibility: Suitable for 1700 Li-ION Batteries
Use: Perfect for Secure eBike Build

---

Compact Design - Easy to carry, plug & play.
No Extra Power Needed - Operates independently.
Measure Output Voltage - For any USB port.
Detect Chargers - Works with PC, home, car chargers.
Wide Range Use - Suitable for all electronic products.

DC Voltage 2.5-6V
Maximum Lift 40-110cm/15.75″-43.4″
Flow Rate 80-120L/H
Outer Diameter of Effluent 7.5mm/0.3″
Material Engineering Plastic
Drive Mode DC Brushless Design

Model: 18650 radiating battery spacer
Material: ABS/PC flame retardant plastic
Dimension: 60 x 20 x 8 mm
Combine: Multiple sizes and shapes
Application: For complex battery packs
Stability: Safe and ideal for eBikes
Operation: Easy to assemble

Material Aluminium.
Bore Diameter d1 5 MM.
Bore Diameter d2 8 MM.
Torsional Stiffness Zero Backlash.
One Piece Construction Long-lasting performance.
Download CAD Model: Download Here

400 Tie Points for versatile circuit design.
2 Power Lanes with 100 tie points.
1 Double Strip offering 300 tie points.
Perfect for Arduino shield prototyping.
Plastic Housing with metal contact clips.

ULN2003A Motor Driver Chip Utilizes ULN2003 Darlington Arrays.
Voltage Supply 5-12V compatible power source.
Signal Indicators 4-way signal indicator LEDs.
Ease of Connection Direct connection via XH-5P socket.
Step Angle 5.625 x 1 / 64 with reduction ratio 1 / 64.
Phase Count 4-phase for precise control.
Current/Phase Optimized for 5V current per phase.

Excellent Material for durability.
Environmental Design for eco-friendliness.
10cm Cable Length for easy connection.
Power Saving technology.
Good Conductivity for optimal performance.
Positive Center 2.1mm diameter.

Portable Design: PCB installed inside aluminum alloy shell.
Interface Markings: Clearly marked for convenience.
Voltage Support: 5V and 3.3V available simultaneously.
Laser Engraved: Permanent clarity on shell text.
Motherboard Protection: 500MA internal resettable fuse.
SWIM Connection: Via pin header or 2.54 mm pitch connector.
SWIM Speed: Supports 9.7 Kbytes/s and 12.8 Kbytes/s.
Status LED: Red and blue indicators for device status.