Chipboard Integration: Features STM32F103C8T6 On board ensuring robust performance.
SWIM Interface: Supports debugging with SWIM debug mode.
Micro USB Power: Uses Micro USB compatible with smartphones for easy connectivity.
Wide Voltage Range: Input voltage from 4.5V to 15V with 3.3V output capability.
Enhanced Storage: 640 bytes of EEPROM for expanded data handling.
Performance Efficiency: High flash erase cycles up to 10,000 for robust use.
Labelled Pins: Easier navigation with detailed pin labels.
User-oriented Design: Intuitive design focusing on ease and efficiency.

Driver Chip: L298N Dual H Bridge
Voltage Range: 5V-35V
Peak Current: 2A per bridge
Output Power: Maximum 20W
LED Indicators: 4 LEDs for logic state
Independent Control: Direction, speed, braking for each motor
Screw Terminals: Easy motor and power connections
Heat Sink: Heavy-duty for performance
Current Sensing: Supports current sensing control

Operating Voltage: 3 - 14VDC
Operating Current: 5A (max)
Compatibility: Arduino and Raspberry Pi
Screw Terminal: Heavy-duty for supply
Direct Connection: 433MHz receiver
Control: Two DC motors

Supply Voltage: 8.2 – 42 VDC
Current Capacity: 2.2A max (24V)
Continuous Current: 1.5 A per phase
Minimum Logic Voltage: 2.5V
Microstep Resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Dimensions: 15 x 20 mm
Weight: 4 gm
Built-in Regulator: Interfaces with 3.3 V and 5 V systems
Over-temperature Thermal Shutdown
Overcurrent and Undervoltage Protection

PWM Signal Generation Board generates reliable PWM signals for precise motor control.
Forward and Reverse Control Onboard buttons easily control motor direction.
Adjustable Speed Control speed using the potentiometer for desired motor operation.
Selectable Frequency Range Choose from multiple frequency settings for varied applications.
12VDC Operating Voltage Suitable for a wide range of electronic devices.
Backward Compatible Works with legacy systems.

Power Supply: 7V to 30V.
Current Control: Adjustable 150mA/phase to 750mA/phase.
Logic Voltage: 5V or 3.3V.
Microstepping Driver: A3967 included for enhanced precision.
Microstep Resolution: Full, half, quarter, eighth adjustable via MS1, MS2 pins.
Compatibility: Suitable for 4, 6, and 8 wire stepper motors.
Firmware Support: Works with multiple microcontroller platforms.
Onboard Voltage Regulator: Ensures stable power distribution.
Built by Experts: Co-designed with Brian Schmalz.

DC Input Range: 6.5V – 12V
5V Output: Stable output with +-0.05V variance
Load Current: Supports up to 800mA
AMS1117 Chip: Reliable voltage regulation
Power Indicator LED: Onboard Red LED
Breadboard Compatible: Easy integration in designs
Compact Design: Small and efficient
Dual-Panel Layout: Enhances module effectiveness

Durable Heavy aluminum construction assures long-lasting performance.
Compact Size A 40x40mm design for versatile applications.
Efficient Internal flow channel forms for optimal heat dissipation.
Versatile Use Ideal for CPUs, laser heads, and more.
Lightweight Weighs only 34 grams making it easy to handle.
Cost-Effective Offers quality cooling at an affordable price.

Heavy Aluminium Build Robust and durable construction for long-lasting use.
Internal Flow Channel Extrusion forming enhances cooling efficiency.
Versatile Applications Suitable for CPU, industrial, and laser head cooling.
Optimal Heat Dissipation Maintains low temperatures under heavy loads.
Efficient Size Compact dimensions improve integration capacity.

Compliance Meets UL, CE requirements
Compact Design Ultra-thin, ultra-small
Voltage Range Supports all voltage input (AC: 100 ~ 240V)
Noise Reduction Low ripple and low noise
Protection Output overload and short circuit protection
Efficiency High efficiency, high power density
Environmentally Friendly Low power consumption, no-load loss <0.1W

Ultra-Small Design Compact form factor for easy mounting.
Wide Voltage Range Accepts 100 ~ 240V AC input.
Low Ripple/Noise Provides stable power output.
Protection Features Overload and short circuit protection included.
High Efficiency Optimized for minimal power loss.
Environmental Friendly Low power consumption with <0.1W no-load loss.
Temperature Range Operates between –20-60°C.
Humidity Resistant 5-95% relative humidity range.
Altitude Functions at altitudes less than 2000M.

Multi-Gauge wire stripper and cutter with comfortable Vinyl grip.
Screw Adjuster to preset wire size for removing the insulation.
High-Grade alloy steel, induction hardened for durability.

Detection Range Adjustable from 3mm to 5cm with stable performance at closer distances.
Compact Size Control panel: 42 x 38 x 12mm; Sensor: 25 x 12 x 12mm, ideal for integration in projects.
Output Interface 6-wire interface with 4 signal output pins, plus positive and negative power pins.
TTL Level Signal Can be directly connected to I/O microcontroller; red indicator lights up when IR light is detected.
Robotics Applications Suitable for robotics, automation, and obstacle detection systems design.

SD Card Interface: Supports FAT16 & FAT32
3.3v Level Shifter: Prevents SD card damage
Includes Libraries: Quick start with SD & RTC
Prototyping Area: Customize with connectors & circuitry
Reliable 3.3v Regulator: Powers SD cards consistently
Arduino Compatibility: Supports Uno, Duemilanove, etc.
Included RTC: Keeps time even when unplugged
Comprehensive Documentation: Easy setup & customization
Efficient Power Use: For demanding SD cards

Standard Prototyping Grid: Features a 0.1″x0.1″ grid for easy prototyping.
Stacking Headers: Includes both stacking and plain headers for mounting choices.
IC Pattern: Supports DIP ICs up to 20 pins.
Integrated Power Rails: Power supply lines run through the middle and sides.
Additional Buttons: Features a reset button and an extra general-use button.
LED Indicators: Comes with two 3mm LEDs (red and green) with added resistors.
ICSP Header: Pass-thru ICSP stacking header for shield stacking and AVR programming.
Solder and Breadboard Options: Flexibility for both soldered and temporary breadboard testing.

Network Connectivity Enabled with Wiznet W5100 chip.
Stackable Design Supports Arduino Ethernet Library.
Simultaneous Connections Supports up to four sockets.
Micro SD Slot For file storage over the network.
PoE Enabled Extracts power from Ethernet cable.
Compatible Works with Arduino Duemilanove, Uno, and Mega.
Low Noise Features low output ripple (100mVpp).
Protection Overload and short-circuit protection.
Download Datasheet.

140 Jumper Wires High-quality & color-coded for easy circuit management.
8 Vibrant Colors Identify connections easily with diverse hues.
Various Lengths 14 size options from 2mm to 125mm.
Solderless & Durable 22 AWG solid wires for strong connections.
Compact Storage Box dimensions of 165 × 55 × 10 mm.

Compatibility Compatible with microcontrollers like 8051, AVR, PIC, DSP, ARM, MSP430.
LED Indicators LED indicators for each relay to show the output status.
High-Power Handling Capable of handling high-current devices with up to AC250V 10A capacity.
Active High Relay Active high relay board for easy integration with MCUs.
Versatile Applications Ideal for home automation, industrial control, and prototyping projects.

Dimensions: 80x80mm
Material: Stainless Steel
Weight: 19g per piece
Durability: Durable and robust design
Protection: Suitable for covering fan blades

Assorted Collection Includes 150 resistors for various projects.
Power Rating Each resistor has a 1/4 watt rating.
Various Applications Suitable for education, prototyping, and DIY projects.
Broad Selection Covers a wide range of resistor values.
Convenient Kit Comes with 5 resistors of each type for flexibility.