Excellent Material for durability.
Environmental Design for eco-friendliness.
10cm Cable Length for easy connection.
Power Saving technology.
Good Conductivity for optimal performance.
Positive Center 2.1mm diameter.

High Efficiency: Operates at up to 86% efficiency for energy savings.
Durable Casing: Aluminum and stainless steel casing for longevity.
Advanced Protection: Features over-voltage, over-current, overheating, and short-circuit safeguards.
Adjustable Output: Voltage adjustment knob increases output by 10-15%.
Low Ripple: Provides high stability for sensitive electronics.
Wide Input Range: Compatible with 100-240VAC, 50/60Hz power sources.
Compact Design: Lightweight and compact for versatile installation.
High PF: Power factor >0.9 ensures optimal performance.
Versatile Applications: Ideal for lighting, security systems, robotics, and more.

Temperature Control: -50 to +110°C
NTC Sensor: High accuracy 0.1°C
Relay Output: 12V 10A capacity
Compact Size: 48x40x14 mm
Parameter Settings: Easy with 3 buttons
Display: 3-digit 7-segment
Low Cost: Affordable thermostat solution
Download Datasheet: Here

High-power Controller up to 4000W!
Multi-purpose for lights, fans, heaters.
Adjustable Voltage 0-220V.
Easy to use Potentiometer knob.
Large current Capacity at 40A.
Includes Protective Shell.
Compact Size for various uses.
Download Datasheet

Receiver Type: High-performance
Sensitivity: -161 dBm tracking
Hot Start: 1s average
Signal Channels: 56
Output Rate: 5Hz
Navigation: Autonomous flight
Multi-system: APM/Pixhawk compatibility
Temperature: -24°C to 84°C
Weight: 26g
Download Datasheet

Main chip: NE555
Input Voltage: 5V-15V DC
Generate adjustable pulse: For MCU and control circuits
Output indication: LED indicators for level and frequency
Current: Max output current of 35mA
Frequency adjustment: Fine-tune duty cycle affects frequency
Download: Datasheet

1. Operating Voltage: 24VDC
2. Temperature Measuring Range: -50 to 90°C
3. Output Relay Capacity : Heating: 10A/220VAC; Cooling: 10A/220VAC
4. Sensor Type: NTC Sensor

Omnidirectional Movement: Effortless movement in any direction.
Durable Material: High-quality steel and plastic construction.
Compact Size: Fits spaces with limited mounting options.
Low Friction: Ball bearings reduce friction for smooth mobility.
Wide Compatibility: Ideal for furniture, robotics, and conveyor systems.
Easy Installation: Standard mounting holes for quick setup.

Base Plate: 27.5mm diameter
Wheel Diameter: 13.5mm
Wheel Height: 18mm
Ball Material: Steel
Cap Material: Plastic
Weight: 15gm
Load Capacity: 5kg

Input Supply Voltage: 3.3~5 VDC
Supply Current: 0.3mA measurement, 60μA standby
Temp. Measurement Range: 0~50°C, ±2°C error
Humidity Measurement Range: 20%~95%RH, ±5%RH error
Output: Digital output
Resolution: 16 bit

Class-D Efficiency: High-quality 3W audio output with minimal distortion.
Filterless Design: Direct speaker connection without output filters.
Portable Power: Compatible with 5V USB power for flexibility.
Compact Build: Small 21x21x2mm PCB for space-saving integration.
Low Power Consumption: Extends battery life for portable applications.
Applications: Suitable for TVs, projectors, notebooks, and portable speakers.

RGB Mixing: Full-color control with PWM.
Resistor Protection: Prevents burnout.
Device Compatible: Arduino, Raspberry Pi, ESP8266.
5V Operation: Common cathode driver.
Compact: Lightweight and easy to use.

Product Name: Delay Relay Module
Product Number: XY-LJ02
Working Voltage: DC 6V-30V or 5V Micro USB
Control Current: 10A (Max)
Quiescent Current: 15mA
Working Current: 50mA
Working Temperature: -40~85℃
Trigger Signal: High/Low-level
Reverse Protection: Yes

Power Supply: 3.7V-12V DC
Module Compatibility: ESP8266-01/ESP-01S
Integrated Sensor: DHT11 Temperature & Humidity
WiFi Connectivity: For remote data transmission
GPIO Pins: For additional customization
Ideal For: IoT and home automation projects

Driver Chip: L298N Dual H Bridge
Voltage Range: 5V-35V
Peak Current: 2A per bridge
Output Power: Maximum 20W
LED Indicators: 4 LEDs for logic state
Independent Control: Direction, speed, braking for each motor
Screw Terminals: Easy motor and power connections
Heat Sink: Heavy-duty for performance
Current Sensing: Supports current sensing control

Supply Voltage: 8.2 – 42 VDC
Current Capacity: 2.2A max (24V)
Continuous Current: 1.5 A per phase
Minimum Logic Voltage: 2.5V
Microstep Resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Dimensions: 15 x 20 mm
Weight: 4 gm
Built-in Regulator: Interfaces with 3.3 V and 5 V systems
Over-temperature Thermal Shutdown
Overcurrent and Undervoltage Protection

Material: Copper (Gold Plated on top)
Compatibility: Compatible for RC Motor ESC Battery Part
Resistance: Low resistance, and gives the best electric flow
Durability: Durable design suitable for repetitive plugging and unplugging
Applications: Ideal for use in RC vehicles, drones, and other battery-operated electronics

Supported Motors 10kg-cm servos like MG995 & MG996
No of Axis 2-axis movement for versatile applications
Material Durable and high-quality construction
Camera Integration Easy camera and sensor integration
Robotics Use Ideal for robotics and FPV systems
Image Monitoring Facilitates image recognition & tracking
Obstacle Avoidance Enables obstacle avoidance with sensors

SD Card Interface: Supports FAT16 & FAT32
3.3v Level Shifter: Prevents SD card damage
Includes Libraries: Quick start with SD & RTC
Prototyping Area: Customize with connectors & circuitry
Reliable 3.3v Regulator: Powers SD cards consistently
Arduino Compatibility: Supports Uno, Duemilanove, etc.
Included RTC: Keeps time even when unplugged
Comprehensive Documentation: Easy setup & customization
Efficient Power Use: For demanding SD cards

Standard Prototyping Grid: Features a 0.1″x0.1″ grid for easy prototyping.
Stacking Headers: Includes both stacking and plain headers for mounting choices.
IC Pattern: Supports DIP ICs up to 20 pins.
Integrated Power Rails: Power supply lines run through the middle and sides.
Additional Buttons: Features a reset button and an extra general-use button.
LED Indicators: Comes with two 3mm LEDs (red and green) with added resistors.
ICSP Header: Pass-thru ICSP stacking header for shield stacking and AVR programming.
Solder and Breadboard Options: Flexibility for both soldered and temporary breadboard testing.