Power Supply: 7V to 30V.
Current Control: Adjustable 150mA/phase to 750mA/phase.
Logic Voltage: 5V or 3.3V.
Microstepping Driver: A3967 included for enhanced precision.
Microstep Resolution: Full, half, quarter, eighth adjustable via MS1, MS2 pins.
Compatibility: Suitable for 4, 6, and 8 wire stepper motors.
Firmware Support: Works with multiple microcontroller platforms.
Onboard Voltage Regulator: Ensures stable power distribution.
Built by Experts: Co-designed with Brian Schmalz.

Voltage: 8-35 VDC operation
Current: 1.0A without heatsink, 2.0A with heatsink
Logic Input: 3 – 5.5V compatibility
Single Package: 5mm x 5mm with thermal dissipation
Microstepping: Options include full to 1/16-step
Protection: UVLO, thermal shutdown, crossover
Downloads: Datasheet

Maximum Current: 7.2A
Resolution: 0.1A
Impulse Frequency: 200KHz
Input Voltage: 20-50 VDC
Power Supply: >200W
Auto-tuning: Parameters auto-setup
Signal Input: Optically isolated
Noise Reduction: Minimal operation noise
Protection: Overvoltage, overcurrent
Download: Datasheet

Supply Voltage: 8.2 – 42 VDC
Current Capacity: 2.2A max (24V)
Continuous Current: 1.5 A per phase
Minimum Logic Voltage: 2.5V
Microstep Resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Dimensions: 15 x 20 mm
Weight: 4 gm
Built-in Regulator: Interfaces with 3.3 V and 5 V systems
Over-temperature Thermal Shutdown
Overcurrent and Undervoltage Protection

Dual H-bridge motor driver for versatile DC motor control.
Operating voltage: 2.7 V to 10.8 V supports low voltage operations.
Output current: 1.2 A continuous, 2 A peak per motor for efficient power distribution.
3V- and 5V-compatible inputs: Easy integration with microcontrollers.
Motor outputs paralleled: Capable of delivering increased current for single motor applications.
Protection features: Includes under-voltage lockout, over-current, and over-temperature safeguards.
Reverse battery protection: FET safeguards against incorrect power polarity.
Optional current limiting: Integrate sense resistors for added control.
Compact design: Ideal for space-constrained applications.

Current Sense Each motor can be monitored.
Heatsink Enhanced thermal performance.
Power-On LED Indicator for operational status.
Double H-Bridge L298N Chip for robust control.
Operational Voltage Range of 5V to 35V.
Protection Over-current and thermal safeguards.
Control Channels Two channels for diverse control.
Direction & Speed Controls for two or more motors.
Download Download Datasheet

Driver Chip: L298N Dual H Bridge
Voltage Range: 5V-35V
Peak Current: 2A per bridge
Output Power: Maximum 20W
LED Indicators: 4 LEDs for logic state
Independent Control: Direction, speed, braking for each motor
Screw Terminals: Easy motor and power connections
Heat Sink: Heavy-duty for performance
Current Sensing: Supports current sensing control

Module Supply Voltage: 2V-10V
Signal Input Voltage: 1.8V-7V
Single Operating Current: 1.5A
Peak Current: Up to 2.5A
Thermal Protection: With Auto Restore
Low Standby Current: Less Than 0.1uA
Mounting Hole Diameter: 2 mm
Ultra-small Size: Easy Integration

Operating Voltage: 3 - 14VDC
Operating Current: 5A (max)
Compatibility: Arduino and Raspberry Pi
Screw Terminal: Heavy-duty for supply
Direct Connection: 433MHz receiver
Control: Two DC motors

Input Current: 1~5A.
Supply Voltage: 12 to 48VDC.
Output Current: 0.2~5.0A.
Power (MAX): 160W.
Temperature: -10～45℃ H bridge bipolar.
Isolation: Optocoupler isolation increases interference protection.
Compatibility: Works with Arduino and other microcontrollers.
Current Control: 8 levels of control via DIP switch.
Motor Drive: Supports 42 and 57-type hybrid motors.
Download: Datasheet

Supply Voltage: 8V – 50V DC (36V recommended).
Output Current: 0.3A – 4.5A (5A peak).
Micro Step: 1, 2, 8, 16.
Maximum PWM Frequency: 200kHz.
Operating Temperature: -10 to +45 °C.
Automatic Half Current: Reduces power usage.
Optical Coupling: High-speed 6N137 for improved precision.
Short-Circuit Protection: Ensures durability.
Download: Datasheet

Input Current: 0~5A
Output Current: 0.5~4.0A
Control Signal: 3.3~24V
Power (MAX): 160W
Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
Temperature: -10～45℃
Constant Current Drive: H bridge bipolar
Optocoupler Isolation: High-speed
Anti-Interference: Enhanced
Subdividable Modes: 7 types
Download: Datasheet